Applied Optics
Italian company established in 2004 for the design and production of custom optical instruments.
Applied Optics
Italian company established in 2004 for the design and production of custom optical instruments.
The Pro Bilberry Camera Holder Car is a new device to make endoscopic movies inside scale model of urban environment.
The camera holder is an advanced product able to guide micro video camera inside the streets of the scale model and it is a cheap alternative to complex gantry solutions.
The Beta Nit Pro Bilberry Camera Holder Car supports the camera in the right position, and help the movement in the curves and in straight ways. The movies obtained are free of defects, the movement is smooth, and the movie is done in real-time. It doesn't require pre or post-processing.
The camera holder car is very simple to use, it is similar to guide a toy car inside tight streets.
The Bilberry Car is only 2cm (3/4 in.) width and 5cm (2 in.) depth. So you can use it without any hassle inside model of scale from 1:500.
To use the Beta Nit Camera Holder Car is not required any planning or programming of complex software.
You put the device inside the scale model, connect the video output to the TV set, the serial cable to a computer with windows OS and start its device driver, and you are ready to filming.
The Bilberry Car does not require any type of setup, and you are ready to go instantly.
When attached directly to a TV set, the Bilberry Camera Holder Car can show the movie in real-time, making the evaluation of the project very easy and fast.
The maintenance of the Beta Nit Bilberry Car is to the cleaning of the device.
The Pro Bilberry Camera Holder Car carries a micro video camera of video high quality: ELMO MP450.
The Elmo MP450 video camera, that equipped the Beta Nit Car, is able to make video of good quality from an illuminantion of only 60lx, but it is recommended a level of 750lx for superior quality.
The Beta Nit Car is realized with machined stainless steel and alluminium. All mechanical, electric and electronic parts are studied for long duration (not less than 5 years).
The Bilberry Camera Holder is safe like a toy car, it does not require to learn complex procedure to the operator like gantry or steady-cam.
The Camera Holder is equipped with an high quality brush motor made by Maxon.
You can control the Beta Nit Car from any Windows computer with a USB or serial port.
You can control the Bilberry Camera Holder Car from the computer or from a wireless keyboard at the Car. Two mode are availables: a programmed mode and an interactive mode (they can be used togheter in any moment).
Every purchaser of Beta Nit Bilberry Camera Holder Car enjoys support through email ticketing system for the entire product life.
The camera holder car is cheap if compared to gantry solutions.
The Beta Nit Pro Bilberry Camera Holder Car is ideal for every urban simulation laboratory and everywhere is required to make fast (eg. real-time) move or shoot inside a scale model. It is help to understand immediately the complex dynamic environmental interactions with interactive verification cycles.
The bilberry car is able to move across street of width of least 2.2cm (0.87 in.).
The bilberry camera holder car does not require setup and is maintenance free.
|
Product features |
Certification | CE | Yes |
Video output |
Video signal | analog | |
| Video camera model | Elmo MP450 | ||
| Image pick-up device | 1/2" IT-CCD | ||
| Effective picture element | 752 pixels x 582 pixels (H x V) | ||
| Resolution | Horizontal: more than 470lines, vertical: more than 420lines | ||
| S/N ratio | 50dB or more | ||
| Angle of view (@ inf.), other are available under request | 36.4° x 48.2° | ||
| Power | Consumption | 10W | |
| Input voltage | 240V 50Hz | ||
| Power socket | 2 x F type – schuko | ||
| Dimensions | Weight | 3 kg | |
| Working dimensions (L x P x H) | 2cm x 5cm x 30cm | ||
| Motor | Type | high precision DC motor | |
| Gear box | planetary gearhead | ||
| Tachometer | 128 impulse | ||
| Control | electronic | ||
| Connections | User | Computer control |
RS-232 serial port or USB 1.1 port |
| Video signal | BNC connector | ||
| Control mode |
Device driver | Operating System | Windows OS 95 to 7 |
| Mode available | 2: interactive, programmed | ||
| Change between mode | instant | ||
| Interactive mode | Number of correction values | 4 fixed + 2 programmable | |
| Control from | computer keyboard, wireless keyboard | ||
| Programmed mode | Maximum number of curves in a sequence | 5 | |
| Observer speed programmable | Yes | ||
| Control from | computer keyboard, wireless keyboard, wired keyboard | ||
| Illumination requirements |
On vertical plane |
Minimum (absolute) | 60 lx |
| Minimum (recommended) | 750 lx | ||
| Scale model requirements |
Material | Floor type | any type but not flexible (ideal is a glass sand blasted floor) |
| Building facade | any material (recommended photo of the facade) | ||
| Dimensions | Mimimum street width (recommended) | 2.2 cm | |
| Mimimum street width (absolute) | 2.0 cm | ||
| Maximum height of building at minimum street width | around 30.0 cm |
Features and specifications are subject to change without notice.
This product has no optional. Il prodotto non ha optional.
All rights reserved ©2004-2011 Nitter - vicolo del Guazzo, 2 - 29121 Piacenza, Italy - Phone +39-0523-1885451 - VAT# IT01582590335
English
Italiano